당사 전문가진이 여러분의 기술, 제품 또는 어플리케이션 관련 질문에 영업일 기준 3일 이내에 답해드립니다.
질문서를 제출하기 전에 모든 필드를 기재하십시오. Pepperl+Fuchs는 여러분의 프라이버시를 존중합니다. 당사 프라이버시 정책을 읽어보시기 바랍니다.
* Pepperl+Fuchs는 여러분에게 도움이 되고 적합한 답을 제공하기 위해 만반의 노력을 하고 있습니다. 여러분의 질문은 영업일 기준 3일 이내에 처리됩니다. 간혹 답변이 지연되는 경우도 있습니다. 이 경우 당사는 여러분의 질문을 조사하고 동료들과 협의하거나 다른 Pepperl+Fuchs 사업장에 여러분의 질문을 전파하는 중입니다. 질문 처리 상태에 관해 전자우편으로 통지해 드립니다.
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
데이타 시트 발췌: 기술 사양
VDM70-10-L/87/122/160
제품 설명 |
Distance sensor, PRT, measuring range up to 10 m, SSI interface, Analog output, M16 plug |
General specifications |
Measurement range | 0.5 ... 10 m by 90 % reflection (white) |
Reference target | Kodak white (90%) |
Light source | laser diode |
Light type | modulated visible red light modulated infrared light |
Laser nominal ratings | |
| Note | VISIBLE AND INVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM |
| Laser class | Measuring laser: 1 Alignment laser: 2 |
| Wave length | Measuring laser: 905 nm Alignment laser: 650 nm |
| Beam divergence | Measuring laser: 2 mrad Alignment laser: 1 mrad |
| Pulse length | Measuring laser: 6 ns Alignment laser: 0.25 µs |
| Repetition rate | Measuring laser: 40 kHz Alignment laser: 1 kHz |
| Maximum optical power output | Measuring laser: 1.8 W Alignment laser: 3 mW |
Measuring method | Pulse Ranging Technology (PRT) |
Linearity error | +/- 8 mm |
Absolute accuracy | ± 12 mm |
Diameter of the light spot | 3 mm x 10 mm at a distance of 4 m |
Resolution | 0.1 mm or 0.125 mm |
Hysteresis | min. 10 mm (adjustable) |
Temperature influence | < ± 5 mm absolute |
Functional safety related parameters |
MTTFd | 230 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED green |
Function indicator | LED yellow: switching state , LED orange : error message |
Control elements | Keypad (3 membrane keys) for parameter settings on the LCD display |
Electrical specifications |
Operating voltage | 18 ... 30 V DC |
Ripple | 10 % within the supply tolerance |
No-load supply current | 190 mA |
Interface |
Interface type | RS 422, SSI |
Output |
Interfaces | RS 422, SSI |
Signal output | 2 PNP, short-circuit protected, reverse polarity protected |
Switching current | 100 mA |
Measurement output | 1 analog output 4 ... 20 mA, short-circuit/overload protected |
Response time | 12 ms |
Repeat accuracy | ± 4 mm |
Other outputs | Service output, plausibility output, PNP, short-circuit protected 50 mA |
Compliance with standards and directives |
Directive conformity | |
| EMC Directive 2004/108/EC | EN 60947-5-2 |
Standard conformity | |
| Laser class | IEC 60825-1:2007 |
Approvals and certificates |
Protection class | II |
UL approval | cULus |
Ambient conditions |
Ambient temperature | -10 ... 50 °C (14 ... 122 °F) |
Storage temperature | -30 ... 75 °C (-22 ... 167 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 12-pin M16 connector |
Material | |
| Housing | ABS |
| Optical face | PMMA |
Mass | 230 g |
Dimensions | |
| Height | 93 mm |
| Width | 93 mm |
| Depth | 42 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27270916 |
ECLASS 12.0 | 27270916 |
ECLASS 11.0 | 27270801 |
ECLASS 10.0.1 | 27270801 |
ECLASS 9.0 | 27270801 |
ECLASS 8.0 | 27270801 |
ECLASS 5.1 | 27270801 |
ETIM 9.0 | EC001825 |
ETIM 8.0 | EC001825 |
ETIM 7.0 | EC001825 |
ETIM 6.0 | EC001825 |
ETIM 5.0 | EC001825 |
UNSPSC 12.1 | 41111613 |
Details:
VDM70-10-L/87/122/160
Product Documentation:
VDM70-10-L/87/122/160
Design / Simulation:
VDM70-10-L/87/122/160
Approvals:
VDM70-10-L/87/122/160
관련문서:
VDM70-10-L/87/122/160
Accessories |
|
|
|
Socket, Angled, 12-pinfa |
|
|
|
|
Single-ended female cordset, M16, 12-pin, PVC cable, 12-wirefa |
|
|
|
|
Single-ended female cordset, M16, 12-pin, PVC cable, 12-wirefa |
|